How to Adjust Steering On Zero Turn Mower?
Are you worried that your zero-turn lawn mower is damaged because it’s not turning to the side or the steerings aren’t aligned?
This means you need to know the answer to how to adjust steering on zero turn mower, which is pretty simple.
If you see the drive arms of the zero-turn mower, there will be holes to which you can adjust the steering of the zero-turn mower.
You only need to remove the bolts, then drive arms, and set them again by attaching them to different holes.
The holes will be in vertical directions; the height of steerings will increase if you select the top holes to set both drive arms.
To understand the topic deeply and understand steering adjustments, scroll the page because below, we’ll answer all questions.
Why Is It Important to Adjust Steering On Zero Turn Mowers?
Proper steering control of a zero-turn mower is essential.
Otherwise, you’ll face difficulty making zero-turn mower turns or even lack the ability to maneuver tightly around obstacles in your lawn landscape.
This is a serious issue because this situation can lead to accidents. That’s why you should take immediate action.
Luckily, it’s not time-consuming or needs any expert technician; you can adjust the steering arms of the zero-turn mower yourself.
What you need is proper knowledge and the right wrench; that’s it.
With these two things, you can easily adjust the steerings or the drive arms of a zero-turn mower.
Also Read: Husqvarna Zero Turn Steering Problems
Step-by-Step Guide to Adjust Steering On Zero Turn Mower
Here’s the step-by-step guide to adjusting the steering on the zero-turn mower.
But before you go deep into the details, we want you to find the right wrench according to the size of the bolts attached to the drive arms.
Determine the Right Adjustment Height
The first thing you should know is the right adjustment height. You can’t just adjust the drive arms at any length.
It’s important to understand what height suits you so you can easily maneuver the mower on the lawn.
To do this, sit on the driving seat and see whether the drive arms of the zero-turn mower are low or high in height.
If they’re high, you need to adjust the arms in one of the last holes. Otherwise, you should set drive arms at the top holes.
Remove Bolts to Detach Drive Arms
Now it’s time to move towards the second step, in which we’ll remove the bolts so the drive arms can be removed from the mower.
For this step, you need a wrench according to the size of the bolts.
- Take the wrench, sit on the side of the mower, and remove the bolts.
- Repeat the same process for the other side of the zero-turn mower.
- Remember, when you remove the bolts, the drive arm will automatically detach, so hold it. Otherwise, it will fall and might break.
Also Read: Toro Zero Turn Steering Problems
Set the Drive Arms At Right Height
After removing the drive arms, you have to set them at the right height.
As we stated, you can set both drive arms to any hole but before you do that, check which height adjustment is right for you.
- Attach the drive arm of one side to the right hole with bolts.
- Follow the same process for the second side.
- Then, close the drive arms and see from far whether they’re aligned.
- If they are aligned, sit on the driving seat and check whether you can use them easily or not. In case not, then again, adjust the drive arms with different holes to make a little bit of height adjustment.
Also Read: List of 10 John Deere Zero Turn Steering Problems (Fixed)
For More Information, Watch This Video!
Frequently Asked Questions (FAQs)
Is it safe to adjust the steering on a zero-turn mower?
Yes, it is safe to adjust the steering or the drive arms of the zero-turn mower as long as you’re not over-adjusting.
There are holes located at the center of the drive arms; with the help of these holes, you can adjust the steerings easily.
How do I know if the steering on my zero-turn mower is properly adjusted?
If the steering on the zero-turn mower is properly adjusted, you’ll not face any type of issue in maneuvering the mower.
Otherwise, you might be unable to drive it in a specific position, such as left, right, or straight line.
How do I adjust the steering on my zero-turn Mower?
You can adjust the steering on the zero-turn mower following these steps.
Find the adjustment bolt on the drive arms and remove them.
After removing, set the steering lever to the right hole on both sides according to your preference.
Then, at last, attach the bolts again and check whether the height adjustment is right or if you need more.
Conclusion
We know what you might be thinking; adjusting the drive arms is an easy process.
The answer to how to adjust steering on zero-turn mowers is pretty simple. Just find the bolts, remove them, and set the arms to the different holes.
In a way, everything is indeed easy but make sure you’re adjusting to the right mounting holes.
And the right holes are the ones that make your control of the zero-turn mower better. Otherwise, you might face issues with the zero-turn mower.
