Bad Boy Mower Oil Change? (Time, Pros, And Process)

Are you planning for a Bad Boy mower oil change? But you don’t know the procedure and the best time to change, right?

Don’t worry; you’re in the right place. In this blog, I’ll explain the step-by-step procedure of oil changing. I’ll talk about the pros and times of changing oil. 

It’s recommended to change the oil every season. But if you notice a dark substance on the dipstick or engine complications, you should change the oil immediately.

And to change the oil, you have to follow an easy process. You need tools like a wrench, rags, gloves, oil, and an oil filter to carry out this procedure. 

Let’s move to the first point: why it’s necessary to change the oil!

Why Is Changing The Oil Important? The Pros

Before discussing the method of oil change, it is important to understand why changing the oil is essential.

Oil lubricates the engine’s moving parts and helps reduce friction and heat.

Over time, the oil in your mower will become contaminated with dirt and debris. Resultantly, it will lose its effectiveness in protecting your engine.

If left unaddressed, this can also lead to serious engine damage and even failure.

When To Change The Oil? The Right Time

The recommended oil change interval for Bad Boy mowers is after every 50 hours of usage. 

However, certain factors, such as extreme heat, heavy use, or dusty conditions, may require more frequent oil changes.

If you’re unsure when you last changed your Bad Boy mower’s oil, a few signs can indicate it’s time for a change.

Dark Substance Appearance 

One of the most common signs is the appearance of a dark, gritty substance on the dipstick.

This indicates that the oil has become contaminated and is no longer effective in protecting your engine.

Mower Engine Issues

Another sign that it’s time for an oil change is if your mower’s engine runs louder than usual.

In addition, it’s also a prominent sign if you notice a decrease in power or performance.

Also Read: Bad Boy Fuel Gauge Not Working (Fixed)

Material Needed For Bad Boy Mower Oil Change

When changing the oil on your mower, it’s important to have all the necessary materials ready beforehand. It includes:

New Oil

The first and most important material you will need is oil. Bad Boy mowers use different types of oil depending on the model.

So, check your mower’s manual or the manufacturer’s website and find the right type of oil for your mower.

It’s also essential to use the right grade of oil to avoid any potential engine problems.

Oil Filter

In addition to oil, you will also need an oil filter. The oil filter removes any contaminants or impurities from the oil before it reaches the engine.

It’s important to change the oil filter every time you change the oil. It will ensure that your engine is getting clean oil.

Bad Boy mowers use different types of oil filters depending on the model. So, make sure you get the right one for your mower.

Oil Drain Pan

When adding the new oil, you will need a container to catch the old oil. An oil drain pan is the perfect container for this job.

Make sure the drain pan is large enough to hold all the oil that will drain from the mower.

Plastic Funnel

You will need a funnel to pour the new oil into the engine. A funnel will make it easier to pour the oil into the small opening of the oil reservoir without spilling it everywhere.

A plastic funnel is recommended as it is less likely to cause damage to the engine.

Rags Or Towels

Changing the oil can be messy, so having rags or towels is always a good idea.

You can use old rags or towels or purchase disposable ones, especially for this task.

Nitrile Gloves

Wearing gloves while changing the oil will protect your hands from hot oil and prevent cuts or scrapes.

Nitrile gloves are a great option as they are durable and resist punctures.

Oil Filter Wrench

Removing the old oil filter can be challenging, especially if it’s been on for a while.

Therefore, an oil filter wrench can make the job much easier by providing a better grip and leverage to loosen the filter.

Wrench Or Socket Set

You will need a wrench or socket to remove the oil drain plug. The size of the wrench or socket needed will depend on the size of the oil drain plug.

So, ensure you have the right size for your mower to make the process convenient.

Also Read: 8 Common Bad Boy Mowers Problems [Fixed]

Steps To Change The Oil On Your Bad Boy Mower

Changing the oil in your Bad Boy mower is a relatively simple process that can be done in just a few easy steps.

Here I will discuss the steps in detail:

1. Get Prepared

The oil change process can be deadly if you don’t comply with precautionary and safety measures. Plus, place the mower on a flat surface.

You must remove the spark plug ignition wires and ignition key. It will minimize the chances of unwanted operations.

Also, collect all the tools I mentioned above before changing the oil to avoid any delay.

2. Warm Up The Engine

The second step is to warm up the engine before changing the oil. Start your mower and let it run for about five to ten minutes to heat the oil.

Warm oil flows better and drains more quickly than cold oil. So, this step will help ensure you get as much oil out of the engine as possible.

3. Locate The Oil Drain Plug

The next step is to locate the oil drain plug. It is usually located at the bottom of the engine. You can also identify it by size and shape.

Once you find the drain plug, place the drain pan under it to catch the old oil.

 4. Drain The Old Oil

Using a socket wrench, loosen the oil drain plug and carefully remove it by hand. The old oil will start to drain out into the drain pan.

Allow the oil to drain completely until it stops dripping. Be careful not to burn yourself with the hot oil.

Also Read: How To Change Blades On Bad Boy Mowers? Steps-By-Steps Process

5. Replace The Oil Filter

While the oil is draining, you should also replace the oil filter. Locate the oil filter, which is typically located near the drain plug.

Use an oil filter wrench to loosen the filter and remove it by hand. Be prepared for some oil spillage when you remove the filter.

Before installing the new oil filter, lubricate the rubber gasket on the filter with some new oil. After that, install the new oil filter by turning it clockwise until it is snug.

Don’t over-tighten the filter, as it may cause damage to the filter or engine.

Also Read: Bad Boy Mower Cutting Uneven? Fix It Now!

6. Add New Oil

Once the oil has finished draining and the new oil filter is installed. Now, it’s time to add the new oil.

Use a funnel to pour the recommended amount of oil into the oil fill port on top of the engine.

Add the oil slowly and check the oil level with the dipstick to avoid overfilling.

7. Check Oil Level And Clean Up

After adding the new oil, start the engine and let it run for a few minutes to circulate.

Turn off the engine and check the oil level using the dipstick. Add more oil if necessary to bring it to the proper level.

Finally, clean up any spilled oil, dispose of the old oil, and filter properly.

Do not dump used oil on the ground or in the trash, as it harms the environment. Many auto parts stores or recycling centers offer used oil disposal services.

Video For Further Clarity.

Frequently Asked Questions (FAQs)

Conclusion

Lastly, I must say that regular oil changes are essential for maintaining good engine health. And it extends the lifetime of your Bad Boy mower.

So, if you think your Bad Boy mower oil needs to be changed, follow the above-mentioned steps.

You should consider replacing the oil timely; it will keep your mower running smoothly.