10 Most Common John Deere GT245 Problems With Solutions

John Deere is known in the market for its best quality and reliable lawn tractors.

Despite their unshakeable reputation, there may come times when you could encounter different problems with the tractor. 

Some of the most common problems that could happen to a John Deere lawn tractor include Electric, transmission, Engine, etc.

But do not worry; these are simple issues and can be fixed easily.

Further in this article, I will give you a detailed insight into the problems that could run into a John Deere GT245 lawn tractor’s functionality. 

So, stick around till the end and take it all away.

Troubleshooting: Common Problems With John Deere GT245

1. Electrical Issues

Electrical problems are one of the most typical issues with the John Deere GT245. This can involve battery, starter, and alternator issues. 

These problems include difficulty starting the engine, fading or flickering lights, and malfunctioning the charging system.

If you’re having these issues, you should first consider the battery. Check that all connections are clean and tight and that the battery is fully charged.

Check the starter and alternator to see if the battery is in good condition.

To test the functionality of various components, a multimeter can be utilized. But only rely on it partially.

2. Transmission Issues

Transmission problems are another common concern with the John Deere GT245. This can involve gearbox issues such as improper engagement.

If you have these issues, check the gearbox fluid level and condition. If the gearbox fluid is low in quantity or unclean, you may need to drain and refill it.

If the fluid level and condition are satisfactory, you may need to inspect the gearbox belt. 

Check to see if it is correctly tensioned and if there are any signs of wear or damage. If the belt becomes torn or worn, it must be replaced.

Also Read: 4 Best John Deere Cool-Gard Alternatives 

3. Engine Issues

Your John Deere GT245’s engine is its beating heart, and engine failures can be disastrous. The GT245’s common engine problems include issues with the fuel system, ignition system, and cooling system.

These problems might appear as jerky operation, poor performance, and overheating. If your engine is malfunctioning, you should check the air filter first.

Check that it is clean and debris-free. When the air filter becomes clogged, it can restrict airflow to the engine, leading it to perform badly.

Alternatively, check the fuel system to see if the air filter is clean. Sometimes, a clogged fuel system could be causing your John Deere GT245 to act up as well.

4. Steering Issues

Steering issues with the John Deere GT245 are also possible. This can include troubles with the steering wheel, such as not turning or feeling loose. 

You should inspect the steering gear and linkage if you have these symptoms.

Examine the steering gear for wear or damage, and ensure it is properly oiled. The steering gear must be replaced if it gets damaged or worn.

Check the steering links to ensure that it is properly set and tightened.

5. Deck Belt Issues

The deck belt is an important component of your John Deere GT245 lawn tractor, and its problems will diminish its performance. Deck belt issues can appear as the deck failing to engage or cutting unevenly.

If you are experiencing these problems, you should check the deck belt tension and condition. 

Examine the belt to see if it is properly tensioned and if there are any signs of wear or damage. The belt must be replaced if it becomes ripped or worn out.

6. PTO Clutch Issues

The John Deere GT245’s PTO (power take-off) clutch operates the mower blades.

PTO clutch issues may cause the blades to malfunction and will not disengage properly, decreasing the quality of your grass cut by the tractor.

Check the clutch setting and wiring if you have problems with the PTO clutch. Ensure the clutch is properly set and the wiring connections are clean and tight.

The clutch must be replaced if it becomes damaged or worn out.

Also Read: John Deere Hydrostatic Transmission Problems – (Fixed)

7. Hydraulic Transmission Issues

Hydraulic transmission is responsible for smooth and efficient power transfer to your wheels.

But, problems with it may cause your tractor to halt its functionality and render you unable to mow your lawn.

The major results of malfunctions with this Hydraulic transmission include jerky movement, loss of power, and malfunctions with gear shifts.

This will cause trouble for you in your lawn mowing.

Fixing this issue is easy. You must ensure the fluid is at the suggested level and the transmission has not been contaminated or overheated.

You may need to replace the transmission if any of them is true.

8. Tire Issues

Tires are an important part of your John Deere GT245, and problems with them can ruin the performance and safety of your lawn tractor.

Common tire issues include punctures, leaks, and uneven wear.

If you have tire problems, check the tires for damage or wear. Check to ensure that the tires are properly inflated and have even tread.

If the tire is damaged or worn out, it may need to be repaired or replaced.

Also Read: John Deere 100 Series Transmission Problems – (Fixed)

9. Brake Issues

The brakes on your John Deere GT245 are an important safety feature, and brake failure can jeopardize both you and your lawn tractor.

Brake problems are difficulty stopping, squeaking or grinding noises, and a soft pedal feel.

If you’re experiencing brake problems, inspect the brake pads and discs for wear or damage.

Check that the brake fluid level is at the recommended level and that there are no leaks in the system. Brakes that are damaged or worn out may need to be fixed or replaced.

10. Mower Deck Leveling Issues

The mower deck is responsible for cutting your grass uniformly and efficiently, and deck-leveling issues can impact the quality of your cut.

Deck leveling issues include uneven cutting height, scalping, and poor overall cutting effectiveness.

Check the deck height adjustment and levelness if you have deck leveling issues. Examine the levelness from side to side and front to back.

Adjust the height or level to ensure an even and clean cut if the deck is not level.

Also Read: John Deere X534 Problems With Their Possible Solutions

Frequently Asked Questions (FAQs)

How many hours do John Deere engines last?

John Deere’s engines are pretty sturdy and give you the best performance. Studies show that an average John Deere engine can last up to 1500 hours.

On the other hand, other lawnmowers will typically get you through 450 or 500 hours.

What are common John Deere problems?

The most common problems that could happen to a John Deere lawn tractor include Electrical, transmission, mild engine, Deck belt issues, etc.

But, rest assured, these problems are relatively easy to fix. Just follow my instructions.

Is John Deere made in China?

Not all John Deere products are made in China. Only products related to agricultural tractors are being manufactured in China currently.

As for other products, they are mostly made in USA and Germany.

Conclusion

John Deere is the best lawn tractor company there is in the market. But, as manufactured machines, they are bound to encounter errors.

Some could be common issues, and some could be unique to you.

But, in any scenario, you should not get worried because these issues are easy to fix.

All you have to do is follow the instructions in this article, and you will go through the process as smoothly as possible.

Even after this, do not hesitate to contact me if you have other doubts or questions. I will get back to you as soon as possible.