What are the Right Scotts Broadcast Spreader Settings? (2023)

Do you also find the Scotts broadcast spreader settings difficult to understand? No doubt, it’s one of the best ways to spread fertilizer evenly on your lawn and keep the grass healthy and lush, but you need to follow several steps.

• Check the net weight of the fertilizer pack (suppose it is 36) and how much area one pack of fertilizer covers (suppose it’s 25000) and divide them. Divide 36 by 2.5; the answer will be 14.4 pounds. 
• Measure your lawn in sq. ft. You can do this by multiplying the length and width of the lawn. If the width is 30 and the length is 50, the answer will be a 1500 sq. ft area lawn. 
• This means we need 14.4 pounds of fertilizer for 1000 sq. Set the spreader setting to one-third; if it’s 15, then set it to 5; if it’s 12, then 4. Put the amount of 15 pounds of fertilizer in the spreader and cover the area of 1000 sq. ft. 
• If you see a lot of fertilizer remaining at the end, you need to increase the setting; otherwise, the one-third setting is perfect for you. 

Below we’ll explain the points we’ve shared above in detailed steps. Our step-by-step guide will leave no guesswork.

So read on, and help your yard bloom in no time! 

Why Is It Important to Set the Scotts Broadcast Spreader at the Right Settings?

The spread setting of the Scotts broadcast spreader or anyone is important because it determines how much fertilizer the lawn will get.

If the grass gets high or low nutrients from fertilizer, you’ll end up with an undernourished lawn. 

So what can you do? 

You have to determine the right setting. That’s the only way to provide specific nutrients throughout the season based on grass growth habits and environment.

Yes, it’s a bit difficult, but we’ve made it easy by devising it in the steps below. 

Also Read: Scotts Spreader Settings Conversion Chart – Complete Guide

Step By Step Guide to Scotts Broadcast Spreader Settings 

To find out the right Scotts broadcast spreader setting, you need to do a test on a 1000 sq. ft area. You can do this test by following three steps. 

Once you’re done with the test, you’ll get the answer about the right spreader setting and how much fertilizer you need for the entire lawn. 

Find the Quantity of Fertilizer You Need for 1000 sq. ft

First, you have to find how much fertilizer you need for 1000 sq. ft.

You can learn about it by dividing the net weight of the fertilizer pack by how much area the fertilizer covers. 

For example, if the fertilizer pack’s net weight is 36 lb and it covers a 2500 sq. ft. area. Then divide 36 by 2.5 (25000 sq. ft area), and the answer will be 14.4.

So you need around 14 pounds, or we can say 15 pounds of fertilizer, to cover a 1000 sq. ft area. 

Measure Your Lawn In Sq. Ft

Now determine how much sq. ft area you have in the lawn.

It’s easy to find; just multiply the length and width of the lawn, and the answer you get will be the sq. ft; of the lawn. 

You can use a measuring tape for it, or you can use a measuring wheel; the choice is yours. After getting it, start the measuring process of your lawn. 

Let’s suppose you have 30 widths and 50 lengths, multiply them by each other. 30 x 50 will be 1500. It means your lawn is 1500 sq. ft; wide. 

Multiply the 15 by 1.5 (value of 1500); the answer should be 22.5. It shows you need at least 22.5 around 23 pounds of fertilizer for the entire lawn.

So make sure you have it before you start the work. 

Also Read: Scotts Edgeguard Spreader Settings? (Best Settings 2023

Choose Spreader Settings 

Once you find the total sq. ft of the area, mark the area for 1000 sq. ft because that’s where you’ll test the fertilizer first. 

Then set the spreader to one-third of the full opening. For example, if you have a total of 12 settings in the spreader, set it to 4; if it’s 15, set it to number 5. 

Add about 15 pounds of fertilizer to the spreader. Then stand at the starting point of 1000 sq. ft and use the Scott broadcast spreader.

Cover the entire area and check how much fertilizer has left.

In case it’s too much, like more than 1 or 2 pounds, increase the spreader setting from one-third. That’s the way to find the right setting. 

Note: It’s better to use organic fertilizer to protect the grass in the testing part. Organic fertilizer doesn’t harm the grass if you go high or low compared to inorganic fertilizer. 

For More Information, Watch the Video Below!

Frequently Asked Questions (FAQs)

Conclusion

We’ve provided the answer to what’s the right Scott broadcast spreader setting in detail.

Now you only need to experiment with our step-by-step guide on your lawn; that’s how you can find the right setting according to your lawn area. 

Remember spreading the right amount of fertilizer is crucial for the safety of your lawn, so don’t rush.

Take your time and understand each step carefully. Lastly, don’t forget to watch the video we’ve suggested above.