Perfect STA Green Spreader Settings? (Explained)

STA spreader is undoubtedly a good tool for fertilizing the lawn and ensuring it will remain green.

However, sometimes, it can create problems, when you have no idea about the right STA green spreader settings. 

But this won’t happen again as we’ll solve your problem below. 

You need to check what type of fertilizer. Some fertilizer particles will be small in size, while others will be big.

Hold the biggest particle and select the STA green spreader setting according to it. Ensure the particle can drop from the spreader. 

If it doesn’t fall easily, the spreader will be blocked by big particles, and you’ll face difficulties.

Let’s understand it deeply, along with the topic of how much fertilizer you need for 1000 sq. ft. 

How to Find the Right STA Green Spreader Settings?

It’s time to understand the sta-green spreader settings in detail.

So fertilizers come in different sizes; you might have fine or mixed particles; it all depends on the products. To understand it better, have a look at the image below. 

On one side, you can see big particles, and on the other small ones, though both are fertilizers.

If you’re using a fertilizer that has small particles and opens the spreader wide, a lot of fertilizer will fall on the lawn, which can damage the grass. 

In contrast, if you set the spreader at the lowest setting and the particles are big, they’ll not fall.

That’s why selecting the setting according to the fertilizer sizes is important. 

The spreader should be wide enough to allow the particles to fall. But remember, being wide enough doesn’t mean you have to open the spreader at the wide setting.

You must select the setting just above the biggest particle size. 

For example, if the fertilizer can easily fall at 1.5 settings, you should go with 2.

We can’t specify the right setting because we don’t know the product you’re using. Therefore, you have to find it yourself via a test. 

Also Read: What are the Right Scotts Broadcast Spreader Settings? (2023)

Apart from the right sta-green spreader settings, you also need to find out how much fertilizer you need for the entire lawn.

Otherwise, how are you supposed to know how much fertilizer you need to add to the spreader for the test? So let’s find the solution. 

Also Read: Scotts Edgeguard Spreader Settings? (Best Settings 2023)

Calculate How Much Fertilizer You Need for the Lawn

Rest assured; the calculation isn’t difficult; it only consists of two easy steps, which are written below. 

• First, hold the pack of fertilizer and find two things: the net weight of the pack and how much area the fertilizer covers. Note both of the things on a notepad. 
• Suppose the fertilizer’s net weight is 34 pounds and it covers an area of 2500 sq. ft. Divide 34 by 2.5 which is the value of 25000 sq. ft. You’ll get the answer 13.6. 
• 13.6 represents that you need 13.6 pounds of fertilizer to cover the 1000 sq. ft area of your lawn with fertilizer. 

Once you find the exact amount of fertilizer. Add the 13.6 or around 14 pounds of fertilizer in the spreader and spread it around a 1000 sq. ft area. 

In the end, if you see that a lot of fertilizer remains (around 2 pounds), even after selecting the setting according to the fertilizer particle size, you have to open the spreader more.

Also Read: EdgeGuard Mini Spreader Settings (Step-by-Step Guide)

Frequently Asked Questions (FAQs)

What setting should I set my spreader?

The spreader setting should depend on the size of fertilizer particles.
If they are small, you should not open the spreader too wide; if the particles are large, you should not open the spreader at low settings. 

What do the numbers on the spreader mean?

The numbers on the spreader show how much you can open the spreader.

By selecting the number with the knob, you can choose the number of fertilizer drops from the spreader. 

Why is the spreader setting for fertilizer important?

The spreader setting is important because it allows you to choose how much fertilizer your lawn plants will get. 

Conclusion

You’ve got the answer that the right STA green spreader setting depends on the size of fertilizer particles you’re using.

It’s important to set the spreader just right above the fertilizer size. In this way, the fertilizer will not be wasted, and your lawn will be safe. 

Lastly, if you think the spreader setting is high, set it at another number. And most importantly, for beginners, it’s better to select natural fertilizers because they don’t harm lawns like chemical fertilizers.